2021-07-10 831
Why can the transmission change speed?Why can the gearbox adjust the output torque and speed of the machine? It's the principle of gears and levers. There are many different gears in the gearbox. Through the combination of gears of different sizes, the adjustment of torque and speed can
2021-07-10 822
Causes of transmission shift skipping defect:l) Due to the excessive wear of the gear teeth of the variable speed gear, gear sleeve or synchronizer cone, a rudiment is formed along the direction of the tooth length, and an axial thrust is generated when the gear is meshed, which is also affe
2021-07-10 829
There are three common types of automatic transmission: at, CVT, AMT and DSG. At that time, at was widely used, and at almost became the pronoun of automatic transmission.At is composed of hydraulic torque converter, planetary gear and hydraulic operation system, which ends the variable spee
2021-07-09 746
Transmission gear often works under the condition of high speed, high load and constant alternating speed and load. In addition to the normal wear and tear of gears, there are also reasons such as poor quality of lubricating oil, poor lubrication conditions, improper driving operation, improper
2021-07-09 767
Structure of manual transmissionManual transmission is a transmission that needs to change the transmission ratio by manually moving the transmission lever. Manual transmission is mainly composed of housing, transmission components (input and output shaft, gear, synchronizer, etc.) and opera
2021-07-09 748
The car transmission has the following functions:① Change the transmission ratio, expand the change scale of the torque and speed of the driving wheel, and make the engine work under favorable conditions (high power and low fuel consumption) with the usual changing trekking conditions;②
2021-07-09 794
How often to change the tank oil:1. Under normal circumstances, the automatic transmission oil (ATF) of cars needs to be replaced every two years or every 40000 km. However, it depends on the model. Different models have different demands. As far as Japanese models are concerned, it is advoc
2021-07-09 743
The car gear oil should have a proper degree of motion to ensure a good lubrication. Most of the car gears are in the condition of mixed lubrication and distance lubrication, mainly the oil film of oil-based agent and the reaction film of extreme pressure anti-wear agent act, and then reduce the
2021-07-09 795
Transmission is composed of transmission organization and operation organization. When required, power take-off can be added. There are two ways of classification: according to the transmission ratio change method and according to the different operation method.According to the change method
2021-07-09 784
1. First, remove the universal joint screw, so that the universal joint of the transmission and transmission shaft is separated; Then remove the clutch cover screw to separate the transmission and clutch; If it is a remote operated transmission, the operation arrangement and the transmission bod